Loading
While building our dream homes, one always wants their wall paints to be bright and radiant. However, somehow when the topcoat is applied on the walls, it might not seem to have the same luster as one imagines for their dream homes. Here is where applying Wall Putty comes to play. It works on enhancing your topcoat and thus, makes your walls look brightest and shiniest just the way you had imagined!
One such putty product is Birla White WallCare Putty which is a white cement-based, water-resistant, white wall putty that ensures a strong binding with building surfaces, a smooth finish, and extensive coverage.
WallCare Putty has Extra HP polymers, which keep the moisture away and avoid flaking. Protect and give a smooth finish to your POP finished walls with Wall Putty.
So, you are assured of aesthetic interiors for your dream home for years to come.
Another important aspect to keep in mind while applying WallCare putty is to get the application process correct. This will not only help you make your walls look brighter but also act as a safeguard to your home. An important part to get this application process right is to ensure that the putty is mixed in an appropriate manner in the right mixing ratio.
After ensuring that the walls are pre-wetted and are clean and free from dust, grease & materials. Now it is time to get the WallCare putty mixture right. Here is how you can get it right in 2 simple steps.
Step 1: Birla White WallCare Putty should be mixed slowly with 36-38% clean water to make a paste. It’s very important to note that the water is added to this cement putty to make the mix and not the other way around.
Step 2: The putty should then be mixed for at least 10-15 minutes until a homogenous paste is formed. A mechanical mixer should be used to thoroughly mix the WallCare Putty, making the paste free from lumps.
Once the paste is prepared, do keep in mind that it must be used within 2-3 hours of mixing with water.
Once you have done pre-wetting the walls, Apply the first coat on the moistened wall surface from bottom to upward direction uniformly with the aid of a putty blade. This would ensure minimum wastage and a proper finish.
Following these simple steps, your wall surface will be ready for painting and will give Birla White WallCare Putty time to set the perfect base coat for your walls.
Note: You won’t have to apply primer on the walls after applying Birla White WallCare Putty because its qualities make it strong enough to work as both a putty and a primer. |
Birla White WallCare Putty’s super adhesion qualities it is able to bind strongly with the base plaster even when the surface is damp & moist. It also accepts any kind of paint or distemper application on it.
Aside from its ease of use, Birla White WallCare Putty is a green product that emits no Volatile Organic Compounds (VOC). VOC is typically produced by paint materials and is harmful to humans.
We hope we have answered your query regarding the How to prepare the perfect wall putty mixture along with some tips to keep in mind.
HAVE HAPPY AND SAFE PAINTING EXPERIENCE!