It is a highly polymer modified, White Cement-based thin-set tile adhesive for fixing all type of
ceramic tile, vitreous/vitrified, semi-vitreous tile, glass mosaic tiles, precast terrazzo and natural stones over concrete and on a variety of substrates. Suitable for both horizontal and vertical surfaces, it can be used in dry and wet areas, indoors and outdoors. Recommended for Tile-On-Tile application, it can also handle heavy traffic in commercial areas.
கேலரி
Best adhesion
Durable exterior tiles
Resilient, lustrous tiles
Sophisticated tiled exteriors
Tiled exterior surfaces
Unbreakable
புராடக்ட் ஹைலைட்ஸ்
சிறப்பம்சங்கள் மற்றும் பலன்கள்
Easy to use - just add water.
Highly Polymer-modified for strong adhesion to various substrates, tiles, and stones
Long open time – perfect for large format & external conditions
Water and shock resistant - great for wet areas & commercial floors
Sag resistant formula for vertical walls
Heat-aging resistant – ideal for high-temperature areas like Jacuzzi & saunas
Low VOC - promotes healthy living.
உபயோகம்
Ceramic & other tiles with porosity <3%
Dry and wet areas
Indoors and Outdoors on horizontal & vertical surfaces
Tile-On-Tile application
Used for Vitrified tiles, Porcelain tiles and ceramic tiles
Medium and Large format Tiles & natural Stones
Substrate
CEMENT-BASED SCREEDS & MORTARS
GYPSUM & CEMENT-BASED PLASTERS/ RENDERS
CONCRETE SURFACES
BRICKS MASONRY
AAC BLOCKS
WATERPROOFING PRODUCTS
CEMENT TERRAZZO
EXISTING VITRIFIED TILES & CERAMIC TILES
EXISTING NATURAL STONES
ANOTHER CEMENT-BASED SURFACE
DRYWALL LIKE CEMENT /BISON/ GYPSUM BOARDS
SURFACE PREPARATION :
All surfaces should be between 40° F(4°C) and 104° F(40°C) and structurally sound, clean and
free of all dirt, oil, grease, loose peeling paint, laitance, concrete sealers or curing
compounds. Check the surface to be true to plumb.
All slabs must be plumb and true to within ¼” (6mm) in 10 ft(3m). Rough or uneven concrete
surfaces should be made smooth with Screed/Plaster material to provide a wood float (or
better) finish.
Dry, dusty concrete slabs or masonry should be dampened, and excess water swept off.
Installation may be made on a damp surface. New concrete slabs shall be damp cured and
28 days old before application.
Expansion joints to be provided & filled with suitable sealant.
Do not cover expansion joints with thin set tile adhesive/ tile.
Application Procedure:
Covergae:
Approx. 55-60 ft2/ 20 Kg bag at 3 mm thickness using 6 mm x 6 mm square notched trowel. *Coverage will vary depending on trowel notch size, type and size of tile and substrate
smoothness and evenness
Grouting
Grouting should be carried out after 24 hours of tiling. Use the appropriate grouting material
from Birla White range of tile grouts.
Properties
வைத்திருக்கும் காலம்
12 months for sealed pack when stored under cover, out of direct sunlight, dampproof condition and
protect from extremes of temperature.
There is no, particular Tile Adhesives for single application as Tiles come in diverse types, sizes, and materials, each requiring specific adhesive properties for optimal bonding. Rest assured, Birla White has launched best tile adhesives for fixing tiles anywhere with its white cement advantage.
Birla White Uses State of art technology and German modified polymer technology, which provides best in class and industry outstanding Tile Adhesives with the help of White Cement Advantage which provides strong bonding with substrate and long lasting elegance to the floor and wall.
Yes, Birla White Tilestix tile adhesive is a better choice than cement for tile installation. Tile adhesives have specific properties that offer improved bonding, flexibility, and resistance to the tile installation that secures tile application.Birla White TileStix tile adhesives also ensure easy workability and provide a seamless result compared to traditional cement mortar.
TileStix Extero is high polymers and cement based thin set adhesive which is mixed with water and
used for tile / stone installation in internal and external areas.
You can use TileStix Extero for internal and external areas like residential floors, walls to install
ceramic / vitrified/ glass mosaic tiles. It can also be used in Submerged areas like swimming pools.
For 20 Kg bag of TileStix Extero, one needs 6 to 6.4 Liters of water. Mix water depending upon the
consistency of mix required and ambient environmental conditions.
The maximum size of tile is 1200mm X 1200mm for installation with TileStix Extero + water.
Yes. For external tile installations, the thermal stresses are critical and would need adhesive to
become accommodative to the movements arising from these stresses. TileStix Extero has the ability
to accommodate such movements.
Yes, TileStix Extero can be used to fix natural stones. It is white cement based adhesive and hence
does not stain light coloured stones.
The maximum height is 50 ft when you want to install tiles using TileStix Extero.
If the engineered stones / Agglomerates / Quartz stones have to be installed on floors, you may use
TileStix Extero.
No. It is mandatory to have spacing between the tiles when installed on external façade or floors.
The thermal movements are very high and spacers are must to accommodate such movements.
ப்ரௌச்சரைப் பதிவிறக்கம் செய்யவும்
