It is a highly polymer modified, White Cement-based thin-set tile adhesive for fixing all type of
ceramic, semi-vitreous, vitrified tiles and natural stones. It is suitable for horizontal and vertical
surfaces, in dry and wet areas for indoor and outdoor application. It is also recommended for tile-on-tile application.
கேலரி
Best look for interiors
Flawless tile alignment
Luxury lounge tile adhesive
Finish mast
Effortless tile setting
Reliable adhesive performance
புராடக்ட் ஹைலைட்ஸ்
சிறப்பம்சங்கள் மற்றும் பலன்கள்
Easy to use - just add water.
Highly Polymer-modified for strong adhesion to various substrates
Water & shock-resistant - perfect for wet areas & commercial floors
Sag-resistant formula for vertical walls
Heat-resistant – ideal for high temperature areas like Jacuzzi and saunas
Low VOC - promotes healthy living.
உபயோகம்
Ceramic & other tiles with porosity <3%
Dry and wet areas
Indoors on horizontal & vertical surfaces
Tile-On-Tile application
Used for Vitrified tiles, Porcelain tiles and ceramic tiles
Substrate
CEMENT-BASED SCREEDS & MORTARS
GYPSUM & CEMENT-BASED PLASTERS/ RENDERS
CONCRETE SURFACES
BRICKS MASONRY
AAC BLOCKS
WATERPROOFING PRODUCTS
CEMENT TERRAZZO
EXISTING VITRIFIED TILES & CERAMIC TILES
EXISTING NATURAL STONES
ANOTHER CEMENT-BASED SURFACE
SURFACE PREPARATION :
All surfaces should be between 40° F(4°C) and 104° F(40°C) and structurally sound, clean and
free of all dirt, oil, grease, loose peeling paint, laitance, concrete sealers or curing
compounds. Check the surface to be true to plumb.
All slabs must be plumb and true to within ¼” (6mm) in 10 ft(3m). Rough or uneven concrete
surfaces should be made smooth with Screed/Plaster material to provide a wood float (or
better) finish.
Dry, dusty concrete slabs or masonry should be dampened, and excess water swept off.
Installation may be made on a damp surface. New concrete slabs shall be damp cured and
28 days old before application.
Expansion joints to be provided & filled with suitable sealant.
Do not cover expansion joints with thin set tile adhesive/ tile.
Application Procedure:
Covergae:
Approx. 55-60 ft2/ 20 Kg bag at 3 mm thickness using 6 mm x 6 mm square notched trowel. *Coverage will vary depending on trowel notch size, type and size of tile and substrate
smoothness and evenness
Grouting
Grouting should be carried out after 24 hours of tiling. Use the appropriate grouting material
from Birla White range of tile grouts.
Properties
வைத்திருக்கும் காலம்
12 months for sealed pack when stored under cover, out of direct sunlight, dampproof condition and
protect from extremes of temperature.
There is no, particular Tile Adhesives for single application as Tiles come in diverse types, sizes, and materials, each requiring specific adhesive properties for optimal bonding. Rest assured, Birla White has launched best tile adhesives for fixing tiles anywhere with its white cement advantage.
Birla White Uses State of art technology and German modified polymer technology, which provides best in class and industry outstanding Tile Adhesives with the help of White Cement Advantage which provides strong bonding with substrate and long lasting elegance to the floor and wall.
Yes, Birla White Tilestix tile adhesive is a better choice than cement for tile installation. Tile adhesives have specific properties that offer improved bonding, flexibility, and resistance to the tile installation that secures tile application.Birla White TileStix tile adhesives also ensure easy workability and provide a seamless result compared to traditional cement mortar.
VitriBind Grip+ is polymer based adhesive which is mixed with water and used for tile installation in
internal floor & wall areas and external floor areas.
You can use VitriBind Grip+ for internal floor & wall also suggested for external floor areas like
residential floors, walls to install ceramic /vitrified tiles of sizes upto 600 mm X 600 mm or medium
format tiles
Yes, you can use Tile Stix Vitribind Grip+ for interior Swimming pool areas or submerged or water
flowing areas. For exterior usage, it is advised to use TileStix Extero.
For 20 Kg bag of VitriBind Grip+, one needs 5.6 to 6 Liters of water. Mix water depending upon the
consistency of mix required and ambient environmental conditions.
The maximum size of ceramic / vitrified tile is 600mm X 600mm for installation with VitriBind Grip+ +
water.
Yes, TileStix Vitribind and above variants can be used to fix natural stones. It is white cement based
adhesive and hence does not stain light coloured stones.
The maximum height is 10 ft or 3 mtrs when you want to install tiles using VitriBind Grip+.
If the engineered stones / Agglomerates / Quartz stones have to be installed on floors, you can use
VitriBind Grip+.
ப்ரௌச்சரைப் பதிவிறக்கம் செய்யவும்
